User manual
16
Click the other elds in the window and make the appropriate changes, if needed.
6. Click Next to conrm your settings or Cancel to discard them and open the network setup Wizard window.
7. In the Network setup Wizard window, click the eld value you want to change, then use the pop-up aid to enter a new value.
By default, the DVR uses DHCP (Dynamic Host Conguration Processor) to acquire compatible (dynamic, changeable) network
settings from a network DHCP server.
Generally, it is preferable to setup the DVR with xed network settings, if possible, to assure the DVR has an unchanging IP
address for remote logins. To enable xed network settings, uncheck the Enable DHCP checkbox, then edit the appropriate
elds to change the settings. Consult with your network administrator to determine the best network settings for your DVR.
When nished, click Next.
In the screen below, the Enable DHCP checkbox was cleared and the IPV4 Address was changed to 192.168.75.8.
SECTION 2: INSTALLING THE SYSTEM