User manual

118
SECTION 8: SYSTEM MAINTENANCE
You can view the sending rate and receiving rate information on the interface. Trac data is refreshed every 1 second.
8.6.2 TestingNetworkDelayandPacketLoss
1. Open the Network Trac menu. Go to Menu | Maintenance | Net Detect
2. Click the Network Detection tab to open the menu.
3. Click on the Destination Address eld, then use the virtual keyboard to enter a address to connect (ping) to. In the eld
shown below, 1492.168.75.3 was entered in the destination eld.
4. Click the Test button to begin the test for network delay and packet loss. The testing result appear in the window. If the
testing is failed, the error message box will open.