User manual

117ALI-HVR3000H Series 960H Hybrid+ DVR User Manual
SECTION 8: SYSTEM MAINTENANCE
8.5 Default
The default option will reset the DVR to its factory settings. Except the network parameters (including IP address, subnet mask,
gateway, MTU, NIC working mode, default route and server port), all other conguration parameters are restored to factory default
settings.
To restore the factory default conguration:
1. Open the Log Information menu. Go to Menu | Maintenance | Default
2. Click OK, then allow the DVR to reboot before continuing.
8.6 Net Detect
8.6.1 CheckingNetworkTrac
You can see real-time information of your DVR network trac, such as linking status, MTU, sending/receiving rate, etc. The trac
data is refreshed every 1 second.
Open the Network Trac menu. Go to Menu | Maintenance | Net Detect