User manual
115ALI-HVR3000H Series 960H Hybrid+ DVR User Manual
4. In the le list of the USB device, highlight the DVR conguration le you want to load, and then click Import (see the screen
above).
5. When the Attention message box opens, click Yes.
6. Allow the DVR to fully reboot, then use it normally.
8.4 Upgrade Firmware
You can upgrade the rmware through a local device or remote FTP server. You should check the current Firmware version
before upgrading your DVR rmware. Firmware upgrade should only be performed when recommended by your DVR support
organization.
1. To check the current rmware version, open the System information display. Go to Menu | Maintenance | System Info
1. If the rmware needs to be upgraded, attach an USB storage device, such as a USB ash drive or USB disk drive, that contains
the rmware upgrade le to a DVR USB port.
2. Click the Upgrade tab on the left.
SECTION 8: SYSTEM MAINTENANCE