User manual

106
NOTE
The Server Port number must be in the range 2000 .. 65535. it is used for remote client software access.
The HTTP port is used for remote IE access.
3. Click Apply to save your settings and close the menu.
7.6 Conguring Email
The system can be congured to send an Email notication to all designated users if an alarm event is detected, etc., an alarm or
motion event is detected or the administrator password is changed.
Before conguring the Email settings, the DVR must be connected to a local area network (LAN) that maintains an SMTP mail
server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to
which you want to send notication.
1. Open the Network Settings menu. Go to Menu | Conguration | Network | General
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network Settings menu. See “7.1
Conguring General Settings” on page 101 for more information.
3. Click Apply to save your settings and close the menu.
4. Click the Email tab to open the email settings men.
SECTION 7: NETWORK SETTINGS