User manual
34
4.2 Live View pop-up menu
Right-clicking the mouse on the desktop opens the pop-up window shown below.
Clicking one of the items listed produces the result described below.
— Menu: Opens the conguration menu window. See “SECTION 5 Record, Playback and Video Backup” on page 37.
— Single Screen: showing only one camera channel on the monitor. Open the drop-down list to select the camera
channel you want to view.
— Multi-screen: opens a submenu where you can choose from several multi-channel screen congurations, including
2 *2, 1+5, 1+7, 3*3, in multi-screen mode, you can view video from multiple camera channels simultaneously.
— Previous screen: Move to the screen displayed previously.
— Next screen: Move to the screen displayed after the current one.
— Start Auto-switch: the screen is automatically switched from one camera channel to the next. You must set the dwell
time before enabling auto-switch. Go to Menu | Conguration | Live View | Dwell Time.
— Start Recording: Select Normal Record and Motion Detection record from the drop-down list.
— Quick Set --> Output Mode: opens a menu where you can select the output mode to Standard, Bright, Gentle or
Vivid. Select the option that produces the best looking screen.
— All-day Playback: Opens a playback menu where you can playback video recorded at a specic time of the day. In If
in Multi-screen mode, double-click on the viewing frame of the camera recording video you want to replay, then select
All-day Playback. A marker on the timeline shows the time recording being played back was made.
SECTION 4: LIVE VIEW INTERFACE