User manual

21ALI-DVR3000H Series 960H DVR User Manual
2.7 Conguring HDD settings
2.7.1 CheckingHDDstatus
Check the status of the HDD installed in the DVR to assure it is functioning normally.
1. Open the HDD Information display. Go to Menu | HDD |General
2. Check the status of the HDD. If the status is:
— Normal or Sleeping - The HDD is working normally.
— Uninitialized or Abnormal - Initialize the HDD before continuing. Check the select box of the HDD to initialize, then
click the Init button at the bottom of the screen.
— Failed - If the HDD failed during or after initialization, replace the HDD.
2.7.2 ManagingNetworkStorage
Additional le storage can be added to your DVR using up to 8 NAS disks, or up to 7 NAS disks with 1 IP SAN disk. To congure this
storage:
1. Open the HDD Information interface. Go to Menu | HDD | General
SECTION 2: INSTALLING THE SYSTEM