Setup guide

ManualsBrandsALIBI ManualsComputer equipmentALI-DVR3004H

ALI-DVR30xxH_SQ

1/22/14

116

108

ALI-DVR3016H backpanel

Item Description

1 VIDEO IN BNC connectors for camera video channels in. Number of channels is dependent on the model of the DVR.

2 Monitor Out (CVBS) BNC connector for CVBS video monitor.

3 AUDIO IN RCA connector for audio in cable.

4 ON / OFF switch Switch for powering the DVR on and o

5 USB This port can be used for a USB mouse or USB memory device such as a ash drive or DVD burner. An additional USB port is located on

the front panel.

6 HDMI Connector HDMI monitor cable.

7 VGA Connector VGA monitor cable.

8 AUDIO OUT RCA connector for audio out cable.

9 LAN RJ-45 connector for Ethernet drop cable.

10 RS-485 terminations Connector for RS-485 devices. Connect the D+ and D- terminals to T+ and T- of PTZ receiver respectively.

11 12 Vdc Plug for 12 Vdc power adapter.

12 GND terminal Ground terminal post.

Remote Control

The enter key on the remote control or the front panel has the same function as a mouse left click. The IR Range of the remote control is 10

meters. The buttons on the remote control correspond with the buttons on the front panel.

7 5

6 4

11141518 16

1213 10

This quick setup guide provides instructions to initially setup and use your new digital video recorder. For additional information on the

extensive capabilities of your DVR, refer to the ALI-DVR3000H Series 960H Digital Video Recorder User Manual provided on CD with

your system.

DVR Front Panel

USB Interface

IR ReceiverPower LED

Status TX / RX

ALI-DVR3000H series DVR front panel

Item Usage

Power LED Indicator turns green when DVR is powered up.

Status STATUS indicator lights in red when HDD is reading/writing.

TX / RX LED indicator blinks green when network connection is functioning properly.

IR Receiver Sensor for the remote control.

USB Interface This port can be used for a USB mouse or USB ash memory devices.

DVR Backpanels

116

108

ALI-DVR3004H backpanel

116

108

ALI-DVR3008H backpanel

ALI-DVR3000H Series 960H Digital Video Recorder Quick Setup Guide

Summary of content (6 pages)

PAGE 1
ALI-DVR3000H Series 960H Digital Video Recorder Quick Setup Guide This quick setup guide provides instructions to initially setup and use your new digital video recorder. For additional information on the extensive capabilities of your DVR, refer to the ALI-DVR3000H Series 960H Digital Video Recorder User Manual provided on CD with your system. 1 2 3 4 DVR Front Panel Status 5 TX / RX Power LED USB Interface 9 10 Item Description VIDEO IN BNC connectors for camera video channels in.
PAGE 2
Item Name Function 1 POWER Power on/off the device. 2 DEV Enables/Disables Remote Control. 3 Alphanumeric Buttons Switching to the corresponding channel in Live view or PTZ Control mode. Inputting numbers and characters in Edit mode. Switching between different channels in All-day Playback mode. 4 EDIT Button Editing text fields. When editing text fields, it will also function as a Backspace button to delete the character in front of the cursor.
PAGE 3
Step 2. Install cameras Install your security cameras as needed to support your security requirements. Always refer to the documentation provided with the camera for installation instructions. Step 3. Connecting it together – initial system setup 1. Plug the coaxial cables from the cameras into the BNC camera input connectors on the back of the DVR. 2. Power on the DVR using the power on / off (I / O) switch on the back panel. 3. Power on the monitor. NOTE 4.
PAGE 4
Observint strongly recommends that you change the default admin user password to improve the security of your surveillance system. To change the admin password, check the New Admin Password box, then enter the new password in the New Password and Confirm fields. Record your new password and save it in a secure place for reference later. Generally, it is preferable to setup the DVR with a fixed network settings, if possible, to assure the DVR has an unchanging IP address for remote logins.
PAGE 5
9. In the camera setup wizard, you can initially select the recording mode for each camera attached to the camera input BNC connectors. To use this menu: Click here to open the camera graphical menu 10. a. In the Camera menu shown above, open graphical menu select the camera to configure. “1” (Analog 1) identifies the camera plugged into the camera input BNC connector 1, “2” (Analog 2) identifies the camera on BNC connector 2, etc. b.
PAGE 6
Specifications Section Item Video/Audio Input Video Compression Video Input ALI-DVR3004H ALI-DVR3008H 4 channels 8 channels Video Input Interface BNC (1.0 Vp-p, 75 Ω) Audio Compression G.711u Audio Input If ID Authentication is not disabled (see the General Settings), a login window will open. In the Login window, select a User Name with administrative privileges, enter its password, then click OK. NOTE: A window of Menu icons will open.