Setup guide

ManualsBrandsALIBI ManualsComputer equipmentALI-DVR3004H

ALI-HVR3000H_SQ

9/8/14

1 2 3 4

111098765

ALI-HVR3016H backpanel

Item Description

1 VIDEO IN BNC connectors for camera video channels in. Number of channels is dependent on the model of the DVR.

2 Monitor Out Not used.

3 AUDIO IN RCA connector for audio in cable.

4 ON / OFF switch Switch for powering the DVR on and o

5 USB This port can be used for a USB mouse or USB memory device such as a ash drive or DVD burner. An additional USB

port is located on the front panel.

6 HDMI Connector HDMI monitor cable.

7 VGA Connector VGA monitor cable.

8 AUDIO OUT RCA connector for audio out cable.

9 LAN RJ-45 connector for Ethernet drop cable.

10 RS-485 terminations Connector for RS-485 devices. Connect the D+ and D- terminals to T+ and T- of PTZ receiver respectively.

11 12 Vdc Plug for 12 Vdc power adapter (provided).

12 GND terminal Ground terminal post.

Remote control

The enter key on the remote control or the front panel has the same function as a mouse left click. The IR Range of the remote control is about

33 feet. The buttons on the remote control correspond with the buttons on the front panel.

7 5

6 4

11141518 16

1213 10

This quick setup guide provides instructions to initially setup and use the ALI-HVR3000H series digital video recorder (DVR). For additional

information on the extensive capabilities of your DVR, refer to the ALI-HVR3000H Series Alibi 4/8/16-Channel 960H HD-TVI Hybrid+

Security Digital Video Recorder User Manual provided on the CD with your system.

DVR Front Panel

USB Interface

IR ReceiverPower LED

Status TX / RX

ALI-HVR3004H, ALI-HVR3008H front panel

(ALI-HVR3016H (not shown) has the same items)

Item Usage

Power LED Indicator turns green when DVR is powered up.

Status STATUS indicator lights in red when HDD is reading/writing.

TX / RX LED indicator blinks green when network connection is functioning properly.

IR Receiver Sensor for the remote control.

USB Interface This port can be used for a USB mouse or USB ash memory devices.

DVR Back panels

1 2 3 4

12111098765

ALI-HVR3004H backpanel

1 2 3 4

12111098765

ALI-HVR3008H backpanel

ALI-HVR3000H Series 4/8/16-Channel 960H HD-TVI Hybrid+ DVR Quick Setup Guide

Summary of content (8 pages)

PAGE 1
ALI-HVR3000H Series 4/8/16-Channel 960H HD-TVI Hybrid+ DVR Quick Setup Guide This quick setup guide provides instructions to initially setup and use the ALI-HVR3000H series digital video recorder (DVR). For additional information on the extensive capabilities of your DVR, refer to the ALI-HVR3000H Series Alibi 4/8/16-Channel 960H HD-TVI Hybrid+ Security Digital Video Recorder User Manual provided on the CD with your system.
PAGE 2
Item Name Function 1 POWER Power on/off the device. 2 DEV Enables/Disables Remote Control. 3 Alphanumeric Buttons Switching to the corresponding channel in Live view or PTZ Control mode. Inputting numbers and characters in Edit mode. Switching between different channels in All-day Playback mode. 4 EDIT Button Editing text fields. When editing text fields, it will also function as a Backspace button to delete the character in front of the cursor.
PAGE 3
Installing the System 5. If you plan to access your DVR remotely, or configure your DVR to transmit alerts, email, etc. to external servers, plug a drop cable from your local area network (LAN) into the RJ-45 LAN connector on the back of the DVR. (By default, the DVR automatically acquires network settings using DHCP.) 6. Connect the power cord to the power connector on the back panel of the DVR, and then into a UPS (preferred) or surge protector. Step 1.
PAGE 4
1. 2. After the initial Alibi loading window (see above), a menu language screen may appear. Select the preferred language from the dropdown list, then click Apply. Observint strongly recommends that you change the default admin user password to improve the security of your surveillance system. To change the admin password, check the New Admin Password box, then enter a new password in the New Password and Confirm fields. Record your new password and save it in a secure location.
PAGE 5
. In the date and time setup window, click the field you want to change, then use the drop-down list or setup aid to select the appropriate values. For instance, click the Time Zone field, then highlight Time Zone for your DVR. In the screen below, other fields were changed appropriately, and the Preferred DNS Server address was set to 8.8.8.8. Click the other fields in the window and make the appropriate changes, if needed. 6.
PAGE 6
In the screen above, you can also enable UPnP™ (Universal Plug and Play) and DDNS, Dynamic DNS to easily access your DVR from outside the local network (i.e., the Internet). If setting up DDNS, the parameters you must configure depend on the DDNS server you use. Refer to the ALI-HVR3000H DVR User Manual for more information about these features. Click Next to continue. 9.
PAGE 7
* d. To configure another camera differently, open the Camera graphical menu and select the next camera to configure. Then repeat the steps above to configure the recording mode for that camera. You can also Copy these settings to other cameras. After configuring the recording mode for each camera, click OK to confirm your settings and close the Wizard. The Wizard will close and the DVR will present the Live View display.
PAGE 8
Step 6. Opening the Menu system After the initial setup of your DVR using the Wizard, the Menus interface enables you to refine your configuration settings and expand the functionality of the system. To use most menus, the user must log into the DVR system, either locally or remotely, with administrative privileges.