User guide

AuxBox Hardware Information
Client Call Recorder Installation and User Guide 43
4105 Analog AuxBox
The 4105 Analog AuxBox offers a seamless digital call recording solution
for analog telephone lines. Because the 4105 monitors the telephone line
instead of a specific telephone, any calls originating from, or answered by,
extension telephones will also be recorded, including outbound dialed
number and Caller Line ID messages.
Package Contents • 4105 Analog AuxBox
• User Guide (this guide)
• Client Call Recorder Software CD
• Telephone line cord
• USB cable
•Relay Cord
Installation 1. Disconnect your telephone line cord from the wall jack and connect to
either one of the RJ11 telephone jacks on the 4105 Analog AuxBox.
Using the supplied telephone line cord, connect the second RJ11 tele-
phone jack on the AuxBox to your telephone wall jack.
2. Ensure that your analog telephone is operational. This provides power
to the 4105 as well.
Connecting to
your PC USB Port
3. Connect the USB cable to your PC and to the 4105.
4. The first time you connect the 4105, Windows should advise “New
hardware Found” and proceed to load the necessary drivers. Windows
should install up to three sets of drivers. USB Composite Device, USB
Audio Device, and Human Interface Device (HID).
5. For each, select the recommended driver by clicking the Next and Fin-
ish buttons as appropriate. You may be prompted for your Windows
CD during this process. Note that on many computers these files are
also stored in C:\WINDOWS\OPTIONS\CABS. Ask your System
Administrator if you have any difficulties.
6. The lights on the front panel indicate whether the hardware installation
was successful. The Power light will be winking to indicate communica-
tion with the PC USB port.
7. Lift the telephone handset (or go off-hook with the speakerphone or
headset) to turn on the In-Use light on the front panel of the 4105 Ana-
log AuxBox. This indicates that the unit is working properly.
Connection Diagram
Client Call Recorder
4105 Analog AuxBox
Analog Telephone
1127 Visual
Alerter
(optional)