User guide

AuxBox Hardware Information
www.algosolutions.com 38
Hardware Description
Front Panel Lights
Power - Winking indicates USB connection; On solid
indicates device is powered but no USB activity has
been detected.
TDM - Winking indicates connection to Meridian M1/
CS 1000; Winking twice indicates connection to BCM/
Norstar
Relay 1 / Relay 2 - Activated when light is on
Ring - Ring has been detected on telephone when light
is on
In-Use - Phone is in-use (on handset, headset, or
hands-free) when light is on
Msg Wait - Message Waiting has been detected on
telephone when light is on
Page - Voice call or page is in progress when light in
on
SW1 - Refer to “Switch Settings” on page 39
Back Panel USB - Connect to USB port of PC; Provides
connectivity to Algo Recording Software
Power - (24Vdc 0.2A) - Connect power adapter
supplied with the unit
Relay 1 / Relay 2 - 2.5mm mono jack supplying dry
contact closure outputs
Audio - 3.5 mono jack providing analog audio
output
RJ12 Jacks - Connect digital telephone in series using
line in/line out configuration OR connect either jack
to wire pair carrying digital signal