User guide

Components
Power/USB Indication
Winking indicates USB connection
Norstar/M1/BCM Status
Winking once indicates connection to M1;
winking twice indicates connection to
Norstar
Relay 1 activated
Relay 2 activated
Detected Ringing on telephone
Detected Off-hook or In-use
(on handset, headset, or hands-free)
Detected Message Waiting indication
Detected Voice Call/Paging in progress
SW 1 Option Switch
Leave at default settings or set switches
for desired output options
Front Panel
Note: It is important to prevent the possible deletion of files due
to Automatic limits. Select the disable feature to prevent deletion
when moving from folder to folder. This check box is also
located in the Options window under Setup.
Selecting WAV/WMA Format
Click on Setup>Options. Select WAV Format (high quality) or
WMA Format (small file size).
Window Media Audio 8 (6.4 kbps, mono 8 kHz).
It is recommended to select WMA Format to save harddrive
space and make the recorded call files smaller and easier to
email. The average file size is 1MB/20 minutes.
WAV Audio (uncompressed, mono 8kHz).
When you select WAV Format the average file size is 1MB per
minute.
3
20
Call Management
M2250 Console Support
This software, along with firmware release 8515-16, allows for
compatibility with the M2250 Console. The USB AuxBox
should be connected on TN1, and will provide all standard
functionality except caller ID. A second USB AuxBox may be
connected on TN2 and connected to the same PC in order to
provide caller ID information seamlessly to the software.