Owners Manual

27
Should you need to replace light bulbs in you Alfresco™ Gourmet Grill, please refer to the following
steps :
LIGHT COVER
REMOVE THE
LIGHT COVER
The light covers are supported by a spring
mechanism on the light fixture. Simply pry
open the light cover from the left or right
sides by hand only.
DO NOT USE ANY TOOLS as you might
chip the tempered glass cover.
REMOVE THE
LIGHT BULB
Reach inside the light fixture and remove the light
bulb by pulling it straight out of the socket.
INSTALLING A NEW LIGHT BULB:
NOTE: When replacing light bulbs, use a soft clean
cloth (cotton or paper towels) when handling lights.
Always keep halogen lights free of fingerprints and
grease when replacing. Because of the light bulb’s
very high operating temperature, grease or finger-
prints left on the light bulb might reduce the bulb’s
life.
Insert a new light bulb using a clean cloth and do not force the light bulb in the socket. Very little effort is
required for the bulb to “SNAP” and lock into place.
Look at the bulb and verify that no fingerprints are left on it. Wipe off any fingerprints and or grease that
might have accidentally come in contact with the glass of the light bulb.
Replace the light cover by inserting it into the light fixture at a slight angle until it “SNAPS” into place.
Power up your Alfresco™ Gourmet Grill and verify the light bulb operation by turning on the light switch.