Gas Conversion

Page 5

Barbeques cont.

8– If your unit is equipped with a Sear-Zone™ burner, the valve has an orifice mounted externally to the

valve body. The orifice is directly attached to the barbeque fire box with a bracket and connected to

the valve with a flexible stainless tube. (Figure 7)

It is mounted on this bracket along with the Sear-Zone™ igniter electrode. Remove and replace this

orifice from the inside of the firebox. (Figure 8)

(Figure 7)

(Figure 8)

FLEXIBLE

PIPING

MOUNTING

BRACKET

SEAR-ZONE™

ORIFICE

VALVE BODY ELECTRODE

(Figure 9)

9– The smoker unit’s orifice is also mounted externally from the control valve body. It is connected with a

small 3/16” Ø aluminum tube. The orifice is mounted on a bracket attached to the fire box.

To replace this orifice, remove the mounting bracket from the fire box and gently bend the aluminum

tubing outward to prevent kinks. After replacement, re-install bracket / orifice assembly back into the

fire box. (Figure 9)

SMOKER ORIFICE

BRACKET

3/16”Ø ALUMINUM TUBING

FIRE BOX