Care & Use Manual

9
NATURAL GAS CONNECTION:
Ensure that the service pipe supplying the Grill is fitted with a shut off valve conveniently positioned and
easily accessible as an emergency gas shutoff.
Your ALFRESCO™ Gourmet Grill for use with Natural Gas comes equipped with it own regulator which
MUST NOT be removed. If this regulator needs to be replaced use only the type specified by AL-
FRESCO™ Gourmet Grill for this appliance.
To connect the regulator / hose assembly follow the next steps:
1. Locate the regulator and gas connection point in the
rear right side of your BBQ unit (remove the rear panel
from the BBQ cart to gain access - in cart mounted
models).
2. Attach a 1/2” FPT x 1/2” MPT (male-to-female) elbow to
the regulator (see figure # 3).
3. Fasten the hose connection to a 1/2” MPT x 3/8” COMP
(compression flare fitting) connected to the elbow (see
figure # 3).
4. Connect flare fitting to gas supply using a 1/2” Ø mini-
mum flexible stainless steel gas hose, no more than 48”
in length.
WARNING
ENSURE THAT THE GAS
SUPPLY HOSE DOES
NOT COME IN CONTACT
WITH THE GRILL BODY
NG FLEXIBLE HOSE
1/2” FPT X 1/2” MPT
90° ELBOW
CONVERTIBLE GAS PRESSURE
REGULATOR
TYPICAL ALFRESCO™ LX2
BBQ (30” MODEL SHOWN)
SHUT OFF HAND VALVE
MUST BE LOCATED IN
ACCESIBLE AREA
INCOMING NG
GAS SUPPLY
Figure # 3