Installation Sheet

STEP 5:
Fasten the screws that the
AXESB-2C has been latched on
with the 5/32” Allen Wrench
provided.
Screws are accessible on the
back at locations A and B
(picture 3) , and locations C and
D on the front. (picture 4)
STEP 6:
Reinstall the AXESB-2C Front
Panel and knobs to complete
the mounting of the body onto
the ALXE Cart by reattaching
the 2 upper screws and 2 lower
bolts shown on step 3.
PIPING CONNECTIONS:
STEP 7:
Prepare the ALXE BBQ gas
connection by removing the
existing 1/2” NPT elbow and
1/2” NPT x 3/8” ODF reducing
nipple (on LP system only) from
the BBQ’s manifold pressure
regulator. (see picture 5).
Picture 3
A
B
Picture 4
C
D
Picture 5
Pressure
Regulator
1/2” NPT
Elbow
1/2” NPT x 3/8” ODF
Reducer Nipple