Gas Conversion

Page 6
Barbeques cont.
10– To replace the rotisserie orifice, it must be accessed from the back of your barbeque unit.
Just like the Sear-Zone™ and the smoker unit, the rotisserie unit has an externally mounted orifice
connected to the valve body with a long flexible stainless tube.
Remove the rear rotisserie access plate (Figure 10) and locate the orifice on the compression fitting
that is mounted on the burner bracket( Figure 11). Replace orifice and re-install the access cover.
(Figure 10)
(Figure 11)
COMPRESSION FITTING
FLEXIBLE TUBING
ORIFICE
BRACKET
ACCESS
COVER
SIDE BURNERS:
Side burners can be found as separate units such as AGSB-2 (2 burner unit) and AGSB-SZ
(Sear-Zone™ unit) or built within the frame of the barbeque such as our AGBQ-56 model Deluxe Grill.
In either case, their respective orifices are installed and accessed in the same fashion. If a side
burner is part of a barbeque such as the Deluxe Grill, gas will be supplied to the burner from the same
manifold that feeds the main unit. All Individual units have their own pressure regulators.
If the side burner is part of a Deluxe Grill, the manifold will be accessed in the same fashion as shown on
page# 4 — item # 7. For all other side burners, follow the next few steps.