Installation Sheet

LOW HEAT SETTING ADJUSTMENT:

NOTE:

ADJUST THE LOW HEAT SETTING

WHEN CHANGING FUELS OR WHEN

ALTITUDE OR OTHER ENVIRON-

MENTAL FACTORS ARE CAUSING

POOR, LOW HEAT, PERFORMANCE.

ADJUSTMENT STEPS:

1. Follow lighting instructions by setting the control

knob on “HI” and allow the burner to preheat for 10

minutes.

2. Turn the control knob to “LOW” and wait for the

burner temperature to drop and stabilize.

3. Attempting adjustment at any setting other than

LOW can create a dangerous condition.

4. Remove knob by pulling straight away from control

panel.

5. Insert a small blade (1/8” wide) screwdriver into the

valve stem to begin the adjustment.

6. Turn counter-clockwise to INCREASE the low heat

flame, or clockwise to DECREASE the blame height.

(see figure at right).

WARNING

NEVER ADJUST THE BURNER SO LOW THAT IT MAY

GO OUT DURING USE. DO NOT OPERATE THE

GRILL WITH THE LOW HEAT SCREW REMOVED.

GAS CAN ESCAPE AND CAUSE A POTENTIALLY

HAZARDOUS CONDITION.

LESS

FLAME

GAS VALVE

1/8” FLAT SCREWDRIVER

Adjust the flames so the burner is fully lit around the perimeter when the knob is in the LOW position.

Do not adjust the burner flame so low that it may go out during use. Once proper adjustment is reached,

reattach the knob by pushing onto stem.

Your

Alfresco

™ Side Burner is now ready for use with the new fuel.

Alfresco

™ AGSB-2 Gas Supply

Conversion Instructions

Alfresco

™ Gourmet Grills

GAS CONVERSION KIT NUMBER

MODEL: LP ► NG or NG ► LP

AGSB-2

190-0054