Installation Sheet

2
B
A
C
D
WRENCH
REPLACEMENT PROCEDURE:
STEP 1:
Remove the side burners’ cover, cooking grate,
burner exterior and inner cap.
STEP 2:
Looking directly over the burner, locate and
remove the orifice from the bottom of the
cone-shaped burner body. Use a 10 mm
socket, driver extension and ratchet wrench
for this procedure.
STEP 3:
Replace the orifice with one for the proper fuel to
be used. DO NOT OVER TIGHTEN!
COVER
GRATE
EXTERNAL
CAP
INNER
CAP
ORIFICE
10 mm
SOCKET
DRIVER
TOOLS REQUIRED TO INSTALL THIS KIT:
ITEM DESCRIPTION:
A
SCREWDRIVER - FLAT 1/8” WIDE TIP
B
RATCHETING SOCKET WRENCH
C
SOCKET EXTENSION DRIVER - 3 in.
D
10 mm SOCKET
E
7/8” WRENCH - OPEN TYPE
E