Use and Care Manual

ASSEMBLY
INSTRUCTIONS
3.
Place
the
Burner
Bracket
(D)
onto
the assembled
panels
as shown
in Figure
3.
Move
the Burner
(C)
so that
the burner
controls can face
Panel
G.
(NOTE:
There
is a HOLE at
the top of Panel
G
to
accommodatethe
control
knob on the
burner.)
Make
sure the
switch
of the
burner
is
alignedwith
the
(G).
4.
Attach
the Connecting
rod
(l)
to the Burner(C)using
Latch
through
the hole
at the top of
the side
panel
(G)
.
Latch
8