Use and Care Manual

ASSEMB LY INSTRUCTIONS
7. Connect
the hose and regulator
to the
cylinder.
The
propane gas
and
cylinder
are sold separately. Use a standard
20 lb.
propane
cylinder
only.
Use this fire
pit
only with
a
propane
vapor
withdrawal supply
system. See
Chapter 5 of
the
standard for
storage and handling of
liquefied
petroleum
gas,
ANSI/NFPA
58. Your
local library or fire department should
have this
book. Storage of an appliance indoors
is
permissible
only
if
the cylinder is
disconnected
and removed from
the appliance. A cylinder must be
stored
outdoors in
a
well-ventilated
area out of reach
of
children,
Adisconnected
cylinder
must have dust caps tightly
installed and must not be
stored in a
building,
garage
or
any other enclosed area. The
maximum inlet
gas
supply
pressure:
250
psi.
The minimum inlet
gas
supply
pressure:
5
psi,
The
minimum hourly of 10000 Btu
is
required
input rating for a fire
pit
for
automatic
operation at rating
less than full input rating. The
pressure
regulator and hose
assembly
supplied
with the appliance must be
used.
The installation must
conform with local codes,
or in the absence of local
codes, with nationalfuel
gas
code, ANSI 2223.1/NFPAS4,
natural
gas
and
propane
Installation Code, CSA 8149.1,
or
propane
storage and
handling
code, B149.2.
;.
'\r
_
"-,
l:tg.'"ru;*;fi
t"*'J:.
-**
'j'
*tanr{ard 3t} Eb. tank
10