Instructions / Assembly

11
ASSEMBLY INSTRUCTIONS
A dented, rusted
or dam
aged propane cylinder may be
hazardous and should be checked by your cylinder
supplier. Never
use a p
ropane cylinder with a damaged
valve co
nnection.
The propane cylinder must be constructed and ma
rked
in accor dance with the specifications f
or LP gas
cylinders of the U.S. Department of Transportation
(DOT) or the standard f or cylinders, spheres and
tubes for transportation of dan
gerous goods and
commission, CAN/CSA-B339.
The cy
linder must have a listed overf illing prev
ention
device.
The cylinder must have a co nnection dev
ice compat ible
with the connection for the appliance.
The cy
linder used must include a collar to protect the
cylinder valve.
Never connect an unregulated propane cy
linder to the
heater.
Attach r
egulator to cylinder. Complete attachment.
Install cylinder.
Do not st ore a spare LP-gas cylinder under or near this appliance
;
Never fill the cylinder beyond 80 percent f
ull;
Place t
he dust cap on the cy
linder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cy
linder valve that is provided with
the cylin
der valve. Other type of caps or p
lugs may result in leakage of propane.
ATTENTION THIS:
P RODUCT IS NOT FOR COMMERCIAL USE INTENDED
FOR RESIDENTIAL USE ONLY.
Do not sit or stand on this fire pit .
Keep children away during assembly, This item contains small parts which can be
swallowed by children.
Do not use indoors and inside any enclosure.
Retain the assembly instructions for future reference.
Installer : Please leave these instructionswith the owner.