Use and Care Manual

10
ASSEMBLY INSTRUCTIONS
Adent ed, rusted or damaged propane cylinder may be
hazardous and should be checked by your cylinder
supplier. Never use a p ropane cylinder with a damaged
valve connection.
The propane cylinder must be constructed and marked
in accor dance with the specifications for LP gas
cylinder s of the U.S. Department of Transportation
(DOT) or the standard f or cylinders, spheres and
tubes for transportation of dangerous goods and
commission, CAN/CSA-B339.
The cylinder must have a listed overf illing prevention
device.
The cylinder must have a c
o
nnection de
v ice compatible
with the connection for the appliance.
The cylinder used must include a collar to protect the
cylinder valve.
Never connect an unregulated propane cylinder to the
heater.
Attach regulator to cylinder. Complete attachment.
Install cylinder.
Do not st
ore
a spare LP-gas c
y
lin
der under or near this applia nce;
Never fill the cylinder beyond 80 percent full;
Place the dust cap on the cylinder valve outlet whenev er the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is provided with
the cylin der valve. Other type of caps or p lugs may result in leakage of propane.
ATTENTION THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR
RESIDENTIAL USE ONLY.
:
Do not sit or stand on this table .
Keep children away during assembly, This item contains small parts which can be
swallowed by children.
Do not use indoors and inside any enclosure.
Retain the assembly instructions for future reference.
Installer - Please leave these instructions with the owner.