Use and Care Manual

Table Of Contents

ASSEMBLY

Place the Table Top(C) with the underside facing skywards.

Fit the Stud(I) by turning into the 4 points on the underside of Table Top(C)

with the Screwdriver(N).

Step 1

Step 2

Fix the Stud(J) to the Table Leg(E) by using Screwdriver (N).

Next, attach Table Leg(E) to studs on Table Top(C) using Washer, Spring

Washer and Nut(K) with Wrench(M) .

DO NOT tighten, yet.

Step 3