Use and Care Manual

4
1
2
PrEParaTion
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present.Place all
parts on a soft, level surface for
assembly. Estimated Assembly Time: 60 Minutes | DO NOT over tighten hardware!
1
Fit the Backrest D to the Seat E by inserting the
prefixed studs into the two holes on the seat. Bolt
together using Washers/Spring Washers/Nuts H. Tighten
the Nut using the Wrench K.
Repeat with second chair.
Hardware Used: H Washer/Spring Washer/
Nut 8mm x4
ASSEMBLY — CHAIR
2
E
Turn the unit upside-down. Fix the Chair Legs F to the
Seat by fitting the prefixed studs into the holes in
the top of the Legs. Bolt together using Washers/Spring
Washers/Nuts H. Tighten each
Nut using the Wrench K.
Repeat with second chair.
Hardware Used: H Washer/Spring Washer/
Nut 8mm x
16