Alfred ML2 Programming Instructions ENVELOPER Alfred International Inc. reserves all rights for the final interpretation of the following instructions. A\ All design and specifications are subject to change without notice
Search "Alfred Home" in either the Apple App Store or Google Play to Download Alfred Home PETITION PLE TY Google Play 4 JY RI)
TATE MEN FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
Failure to follow the below instructions could result in damage to the product and void the factory warranty. The accuracy of the door preparation is critical to allow proper functioning and security of this Alfred Product. Misalignment of the door prep and lock can cause performance degradation and hinder the security functions of the lock. Finish Care: This locket is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting finish.
Front assembly A: Status indicator(Red) B: Status indicator(Green) C: Touchscreen keypad D: Low battery indicator E: Card reader area 3/15 G: Handing switch H: Reset button I: Internal indicator J: Multi-functional button K: Thumb turn
Master Mode: The Master Mode can be entered by entering PIN Code+ * to program the lock. Master PIN code: The Master PIN Code is used for programming and for feature settings. The default Master PIN Code must be changed after installing. The Master PIN Code will also operate the lock in Away Mode and Privacy Mode. Simple PIN Code Rule For your security, we have set up rule to avoid simple pin codes that can easily be guessed. Both the Master PIN Code and User PIN Codes need to follow these rules.
11 ONS Away(Vacation) Mode This Feature can be enabled in the Master Mode menu, or through your third party Zambezi Hub {sold separately). This feature restricts access of all User PIN Codes except Bluetooth Keys and the Master Code. If someone unlocks the door by using the inside thumb turn or key override, the lock will sound an audible alarm for 1 min.
DEFINITIONS Access Cardiogram) Access Cards can be used to unlock the lock when placed over top of the Card reader on the front face of the ML2. These cards can be added and deleted at the lock using the Master Mode Menu. You can also delete Access cards at any time within the Alfred Home App when connected via WIFI or BT or assign an Access card to a specific member on your account. Maximum number of Access Cards per lock is 250.
FACTORY DEFAULT SETTINGS Settings Factory Defaults Master PIN Code 12345678 Auto Re-lock Disabled Speaker Enabled Wrong Code Entry Limit 10 times Shutdown Time 5 mind Bluetooth Disabled{Energy saving) Language English OCK OPERATION -Enter Master Mode 1. Touch Keypad screen with your hand to activate lack. (Keypad will illuminate} 2.Press twice 3.
OCK OPERATION -Add User PIN Codes ~ User PIN Codes can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Enter Master Mode. 2. Enter "2" to enter Add User menu 3. Enter "1" to add User PIN code 4. Enter New User PIN Code followed by "vy" 5. Repeat step 4 to confirm PIN Code. 6. To continue adding new users, repeat steps 4-5. When Registering User Pin Codes, the codes must be entered within 10 Seconds or the Lock will time out.
OCK OPERATION -Delete User PIN code User PIN Codes can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Enter Master Mode. 2. Enter "3" to enter delete User many 3. Enter "1" to delete User PIN Code 4. Enter User PIN code number or User PIN code followed continue deleting User PIN code, repeat steps 4 e Access Card Access Card can be deleted in Settings options on the Alfred Home App or In Master Mode Menu at the Lock.
OCK OPERATION -Silent Mode/Language Settings Silent Mode or Language Change Features can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Languages Master Mode Menu Instructions: 1.English 1. Enter Master Mode 2.Spanish 2. Enter "5" to enter Languages Menu 3.Portuguese 3. Enter 1-5 to Enable a select voice guide language 4.French (see language choices in table to the right) 5.
OCK OPERATION -Bluetooth Settings(Power Save) Bluetooth Setting (Power Save) Feature can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Enter Master Mode 2, Enter "7" to enter Bluetooth Settings Menu 3.
PROGRAMMING TREE FOR MASTER MODE MEN {1]Modify Master PIN code [Add eer i od] { 3[Add user access card [ 1] Delete user PIN code secs Portuguese Hh Disable speaker Enable Bluetooth Disable Bluetooth [6] Enable Away Mode [7] Toothbrush settings | | 12/15
HOW TO USE ( Unlock the door J 1. Unlock the door from outside Use PIN code key Use Access Card » » Place palm over lock to wake up the keypad. Input User PIN Code or Master PIN Case and press *y* to confirm. 2. Unlock the door from inside Manual thumb turn Place Access Card on Card reader area ah Turn the thumb turn on Back Assembly (Thumb turn will be in the vertical position when unlocked} [2] ( Lock the door 1.
HOW TO USE Enable Privacy Mode J To Enable Privacy Mode (Inside Deadlock), Push and HOLD the Multi-function button an Back Assembly for 3 Seconds. When Privacy mode is enabled, it restricts the foll Master Pin), All registered Access Cards and All Di This feature will be ing credentials: All User PIN Codes (except for tal Bluetooth Keys sent through Alfred Home App.
HOW TO USE ( Reset to factory default settings J Factory Reset Fully resets all settings, network pairings (Ghee or Z-Wave), memory (activity logs) and Master and User Pin Codes original factory settings. Can only be performed locally and manually at the lock. 1. Open the door and keep the lock in “unlock” status 2, Open battery box and find the reset button. 3. Use a thin object to press and hold the reset button. 4. Keep holding the reset button and remove a battery from battery box then replace it. 5.
