Alfred DB1 Series Programming Instructions ENVELOPER Alfred International Inc. reserves all rights for the final interpretation of the following instructions.
Congratulations on Installing your new Alfred Smart Lock! Next step is to download the Alfred Home App. All Programming and setting features can be completed within the Alfred Home App while standing in Bluetooth Range of your Alfred Lock.
Failure to follow the below instructions could result in damage to the product and void the factory warranty. The accuracy of the door preparation is critical to allow proper functioning and security of this Alfred Product, Misalignment of the door prep and lock can cause performance degradation and hinder the security functions of the lock. Finish C; This locket is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long lasting finish.
Touch screen keypad Status indicator(Green) 1#Status indicator(Red) 2# Status indicator{Battery) 3% = Reset button Cylinder{optlonal} Thumb turn Status Indicators ~~ J 1#. Unlocked or setting succeed 2#. Locked or setting 3#. Low battery Warning Micro USB Reboot button power port FRENZIED Master and User PIN codes have 4-10 digits, the default Master PIN code is [12345678]. Please change it prior to programming of the lock.
Master Mode: The Master Mode can be entered by entering PIN Code+#” to program the lock. Master PIN code: The Master PIN Code is used for programming and for feature settings. The default Master PIN Case must be changed after Installing. The Master PIN Code will also ope e the lock In Away Mode, Simple PIN Code Rule For your security, we have set up a rule to avoid simple pin codes that can easily be guessed. Both the Master PIN Code and User PIN Codes dean to follow these rules.
Status LED: Located on outside escutcheon. Green LED will illuminate when the door is unlocked or for a successful settings change. Red LED will illuminate when the door is locked or when there is an error in settings input. User PIN code: The User PIN Code operates the Lock. They can be created between 4 and 10 in length but must not break simple pin code rule. You can assign a User Pin code to specific members within the Alfred Home App.
[YS ge STENT -Add User PIN Codes Adding User PIN Codes can be programmed in Settings options on the the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Touch Keypad screen with your hand to activate lock. (Keypad will illuminate) Lock Response 2. Enter twice + Master PIN Code + Successful: 3. Enter “2 + User Number {01-20} + #* 4. Enter User PIN code (4-10 Digits) + 5.
-Silent Mode Silent Mode can be programmed in Settings options on the Alfred Home App or in Master Mads Menu at the Lock. Master Mode Menu Instructions: 1. Touch Keypad screen with your hand to activate lock. {Keypad will illuminate) 2. Enter twice + Master PIN Code + 3. Enter Enable Speaker Default Setting, Audible Keypad Beeps Enter Disable Speaker No Audible Keypad Bess -Enable Away Mode Away Mode Features can be programmed in Settings options on the Alfred Home App or in Master Mods Menu at the Lock.
Programming Tree for Master Mode Menu [1] Modify Master PIN code [2[Add users | [3[ Delete users | 1 4| Auto re-lock Enable [Disable | — 1| Enable Master Mode 5| Speaker L 2| Disable —1 6| Enable Away Mode [1] Enable Bluetooth 2|Disable Bluetooth) t— 7| Bluetooth settings Inclusion/Add El # [2] Exclusion/Remove 8/10
Unlock the door ) 1. Unlock the door from outside -Use PIN code key » » Place palm over lock to wake up the keypad. Input User PIN Code or Master PIN Code and press “# to confirm. 2. Unlock the door from inside Manual thumb turn ie Turn the thumb turn on inside body (Thumb turn will ba in the vertical position when unlocked) ( Lock the door 1. Lock the door from outside Auto Re-lock Mode If Auto Re-Lock Mode is enabled, the latch bolt will be extended and locked automatically after approx.
[ use Visual PIN Protection Fak » INCS UP » User can prevent PIN code exposure from strangers by entering additional random digits before or after their User Pin Code. Example if User Pin Code was 4554 you could enter “124554” then "# or "4554873" then Fake unlock their device. In both cases the User Pin code is still intact but to a stranger it cannot easily be guessed. PIN Use Emergency Micro USB Power Port and Reboot Button Micro USB.
For support, please reach out to: You can also reach us at 1-833-4-ALFRED (253733) www.alfredinc.
