Installations

※ Dimensions
||
||
||
||
||
ll
※ Installation procedures
2. As shown on the 闸， insert the base(7) with protective b 佣时
(町， washer(6) and expansion plug(8) to mounting hole. After
adjusting proper 阳 sition ， mark the drill holes ac ∞ rdingly.
Then drill4 holes with size øa on the marking pla 出 S ， then
put 由 e expansion plugs(8) into the holes respectively.
-2-
1.After selecting proper position , drill a mounting hole as
shown above. If the thickness of decoration layer 注
50mm(1 31/32") , please ins 恒 11 on the floor directly.