Datasheet

CHOOSE YOUR USB Pro PRODUCT
TECHNICAL DATA
Our policy is one of continuous improvement and we reserve the right to change specifications without prior notice.
Inputvoltagerange 9-32Vdc
Outputvoltage 5Vdc +/- 0.2V
OutputPower 2.1A (single) 3.0A (double) - max 1.5A per socket
Application Charges all USB devices including Apple and Android
Transientvoltageprotection Meets ISO7637-2 International standard for 12/24V vehicles
Outputnoise <50mV pk-pk
Offloadcurrent(quiescentcurrent) <1.7mA
Powerconversionefficiency 90%
Operatingtemperature -25°C to +55°C to meet this specification table
Storagetemperature -25°C to +100°C
Operatinghumidity 95% max., non-condensing
Casework Black polycarbonate body
Connections Input: 6.3mm push-in flat blade connectors
Output: USB type A single socket/double socket - tested to 10000 mating cycles
Outputindicator Blue LED output indication
Mountingmethod 30mm diameter hole with or without bezel. USB2 for non through fitting applications.
Safeareaprotection:
OverCurrent
Overheat
OvervoltageandUndervoltage
ReversePolarity
Transients
Catastrophicprotection
Limited by current sensing circuit
Limited by temperature sensing circuit
Limited by sensing circuit
Limited by sensing circuit
Protected by filters and rugged component selection
Internal fuse
Approvals 2014/30/EU The general EMC directive
Regulation 10 The automotive directive
93/68/EEC The CE marking directive
AES5, ECE R118.02 and UL 94: V-0
Designedto EN50498, EN61373 and ISO 7637-2
To fully meet railway approval to EN50155 & EN50121-3-2 the PVPro is to be used in conjunction with a
PV6i-R or PV12i-R
Markings CE and E (automotive) marked
IPRating: IP30
PartNumber Description Dimensions(mm) Weight
PVPro-S Single output 12/24-5V USB Charger 2.1A Ø37 x 33; Hole Ø30 20g
PVPro-D Double output 12/24-5V USB Charger 3.0A (1.5A per socket) Ø37 x 33; Hole Ø30 24g
PVPro-SFf Single output 12/24-5V USB 2.1A Front fitting Ø47 x 33; Hole Ø30 23g
PVPro-DFf Double output 12/24-5V USB Charger 3.0A Front fitting Ø47 x 33; Hole Ø30 27g
PV-USB2 Single output charger only 12/24-5V USB 2.1A 113 x 24 x 15 17g
PV-USB-POD Mounting pod for USB Chargers Width 60; Height 52; Depth 80 55g
PV-USB-H1 Standard 1.2m wiring with inline 2A fuse 1 x Red 1.2m, 1 x Black 1.2m 50g
For Railway Approved Versions , please see PowerVerter Pro Railway
Version: 1709