Datasheet

ALFACHARGE PART SELECTION
Our policy is one of continuous improvement and we reserve the right to change specifications without prior notice.
Input voltage range 9-32Vdc
Output power Nominal 5W
Application Charging of wireless enabled devices
Transient voltage protection Meets ISO7637-2 International standard for 12/24V vehicles
Tx-Range 5mm
Off load current (quiescent current) 6mA
Power conversion efficiency 50% - 60%
Operating temperature -25°C to +30°C
Storage temperature
-25°C to +100°C
Operating humidity 95% max., non-condensing
Casework Black polycarbonate body
Connections Input: 6.3mm push-in flat blade connectors
Output: Wireless transmission <200kHz
Output indicator Green/blue LED output indication
Mounting method Box with mounting screw holes - screws provided. Can also be installed by clips or other bespoke
method
Safe area protection: Over Current
Over heat
Overvoltage and Undervoltage
Reverse Polarity
Transients
Catastrophic protection
Limited by current sensing circuit
Limited by temperature sensing circuit
Limited by sensing circuit
Limited by sensing circuit
Protected by filters and rugged component selection
Internal fuse
Approvals 2014/30/EU The general EMC directive
Regulation 10 The automotive directive
93/68/EEC The CE marking directive
Designed to EN50498, EN61373, ISO 7637-2 & R118
Markings CE and E marked
IP Rating: IP65 when installed correctly
TECHNICAL DATA
Part Number Description Dimensions (mm) Weight
AL1-H Integrated wireless phone charger with horizontal connectors 65.4 x 56.4 x 14 70g
Version: 1905