User Manual
Table Of Contents
- 1. Hardware
- 2. Technology Overview
- 3. Software
- 3.1 Software Installation
- 3.2 Using the Software
- 3.3 Custom edit processing module
- 3.4 Audio Module Parameters
- 3.4.1 Input Source
- 3.4.2 Expander
- 3.4.3 Compressor & Limiter
- 3.4.4 Automatic Gain Control
- 3.4.5 Equalizers
- 3.4.6 Graphic Equalizer
- 3.4.7 Feedback Suppressor
- 3.4.8 Noise Gate
- 3.4.9 Ducker
- 3.4.10 Ambient Noise Compensation (ANC
- 3.4.11 Auto Mixer
- 3.4.12 Acoustic Echo Cancelation
- 3.4.13 Noise Suppression
- 3.4.14 Matrix
- 3.4.15 High and Low Pass Filter
- 3.4.16 Delay
- 3.3.17 Output
- 3.4.18 USB interface
- 3.5 Settings Menu
- 4. Control
- 5. FAQs
- Appendix A: Module ID Distribution
- Appendix B: Module Parameter Types (1)
ALF-DSP 88-U
-8-
1.4 Mechanical
Ventilation:
The recommended highest operating ambient temperature is 30℃ / 86℉.
Make sure that there is no obstruction on both sides (a gap of at least 5.08cm / 2 inches shall be reserved). Please do
not cover the thermal vents of the device with newspapers, a tablecloth, or any other objects.
1.5 Front Panel
ALF-DSP44-U / ALF-DSP44-UD
ALF-DSP88-U / ALF-DSP88-UD
① Power: LED power indicator.
② STATUS: The operational status indicator of the device.
③ USB AUDIO: USB audio for connection to host PC. (1-in / 1-out)
④ I/O: Shows signal status of Input / Outputs.
1.6 Rear Panel
ALF-DSP44-U/ ALF-DSP44-UD
ALF-DSP88-U/ ALF-DSP88-UD