User Manual
Table Of Contents
- 1. Hardware
- 2. Technology Overview
- 3. Software
- 3.1 Software Installation
- 3.2 Using the Software
- 3.3 Custom edit processing module
- 3.4 Audio Module Parameters
- 3.4.1 Input Source
- 3.4.2 Expander
- 3.4.3 Compressor & Limiter
- 3.4.4 Automatic Gain Control
- 3.4.5 Equalizers
- 3.4.6 Graphic Equalizer
- 3.4.7 Feedback Suppressor
- 3.4.8 Noise Gate
- 3.4.9 Ducker
- 3.4.10 Ambient Noise Compensation (ANC
- 3.4.11 Auto Mixer
- 3.4.12 Acoustic Echo Cancelation
- 3.4.13 Noise Suppression
- 3.4.14 Matrix
- 3.4.15 High and Low Pass Filter
- 3.4.16 Delay
- 3.3.17 Output
- 3.4.18 USB interface
- 3.5 Settings Menu
- 4. Control
- 5. FAQs
- Appendix A: Module ID Distribution
- Appendix B: Module Parameter Types (1)
ALF-DSP 88-U
-5-
1. Hardware
1.1 Safety Instructions
Safety Instructions
Important safety instructions:
1. Read these instructions.
2. Keep these instructions secure .
3. Pay attention to all warnings.
4. Follow all instructions.
5. Please keep the device away from water. The device cannot be exposed to water drips or water splashes; make
sure that there is no object with liquid near the device, such as a vase.
6. Please use dry cloth to clean the device.
7. Please do not block the vent. Please install the device based on the manufacturer's instructions.
8. Please do not install near any heat source, such as radiator, furnace, or other devices (including amplifiers) that
generate heat.
9. Please make use of a protective grounding connection to connect the device to the power socket. Please do not
use polarized plug or grounding plug. A polarized plug has two leaves, and one is wider than another. A grounding
plug has two leaves and a third ground terminal. The wide leaf or third ground terminal can provide safety for the
users. If the plug provided does not correspond with the power socket, please contact an electrician to replace the
old socket with a new one.
10. Protect the power cord so that it will not be trample d or jutte d, particularly the plug, the socket and the
connections of cord and device.
11. Please use the accessories designated by the manufacturer.
12. Please only use a cart, a tripod, or a desk designated by the manufacturer, or sold together with the device. When
using a cart, please take care with the mobile cart / device to avoid injury from rollover.
13. Please unplug the device during a thunderstorm or during the idle period.
14. Please contact our qualified maintenance personnel to deal with all maintenance related issues. For example, the
power cord gets damaged, liquid has spilt over, or an object falls onto the device; the device is exposed to rainwater
or moisture; the operations are not correct, or the device completely fails.
The lightning logo (an equilateral triangle with an arrow) is used to make the users aware of the uninsulated
"dangerous voltage" within the product shell, which may cause electric shock. An equilateral triangle with an
exclamation mark is adopted to make the users understand the importance of the operations and maintenance
instructions given in the appendixes attached to the product.
Warning: In order to prevent electric shock, please do not use a polarized plug provided by a device with an
extension cord. The socket outlet cannot be inserted except for the sharp end.