User Manual

ALF-DSP 88-U
-38-
Panel operation and Indicators:
1. Button remains illuminated, indicating that it is configured with a mute function.
2. Button keeps flashing, which indicates that the button is configured with gain function. The configured Rotary
Encoder adjusts the gain of the assigned channel. 13 indicators around the Rotary Encoder indicates gain level.
They are on or off with gain level set. When all 13 indicators are off, it indicates a gain of -72dB while all on
indicates a gain of 12dB.
3. A momentary flash when pressing the button indicates the button is configured for preset or command recall.
Command functions data strings comes from the central control command. Please refer to section 5 - Control.
3.5.6 Dante Setting
Note: Before accessing Dante settings, please check t h at the computer network port and Dante network port of the
DSP has been conne cted to the Dante ne twork. On the DSP software interface, you can only check the signal
indicator of the Brooklyn card.
In order to set up a device lock or to check the signal indicators, please use Dante Controller.
Dante routing is also set up in Dante Controller. Dante Controller provides routing, channel information, network
settings and other Dante network related information. The Dante devices receiving channels are displayed on the
left part of the inte rf ace , while the Dante devices transmitter channels are displayed on the top part of the in te r f ace .