User Manual
Table Of Contents
- 1. Hardware
- 2. Technology Overview
- 3. Software
- 3.1 Software Installation
- 3.2 Using the Software
- 3.3 Custom edit processing module
- 3.4 Audio Module Parameters
- 3.4.1 Input Source
- 3.4.2 Expander
- 3.4.3 Compressor & Limiter
- 3.4.4 Automatic Gain Control
- 3.4.5 Equalizers
- 3.4.6 Graphic Equalizer
- 3.4.7 Feedback Suppressor
- 3.4.8 Noise Gate
- 3.4.9 Ducker
- 3.4.10 Ambient Noise Compensation (ANC
- 3.4.11 Auto Mixer
- 3.4.12 Acoustic Echo Cancelation
- 3.4.13 Noise Suppression
- 3.4.14 Matrix
- 3.4.15 High and Low Pass Filter
- 3.4.16 Delay
- 3.3.17 Output
- 3.4.18 USB interface
- 3.5 Settings Menu
- 4. Control
- 5. FAQs
- Appendix A: Module ID Distribution
- Appendix B: Module Parameter Types (1)
ALF-DSP 88-U
-28-
Slope : Slope refe rs to the attenuation values of the transition zone of the filter. There are a total of 8 attenuation
values including 6, 12, 18, 24, 30, 36, 42 and 48dB/Oct. For example, 24dB/Oct indicates that the attenuation range
is -24dB for each octave of frequency in the transition zone.
Select the On / Off button to activate or deactivate the high-pass or low-pass filters individually.
3.4.16 Delay
The Delay module is used to add delay to the output audio signal. This can be used to align audio signals in
physical time.
Activate button: Turns On / Off the delay module and inserts it into audio
signal path to increase fixed delay time for signals.
Millisecond (ms): Sets the delay time in milliseconds. The value ranges from
1 to 1200 milliseconds. Both meter and feet are alternate units provided to
milliseconds to set a delay time based on physical distance.