User Manual
Table Of Contents
- 1. Hardware
- 2. Technology Overview
- 3. Software
- 3.1 Software Installation
- 3.2 Using the Software
- 3.3 Custom edit processing module
- 3.4 Audio Module Parameters
- 3.4.1 Input Source
- 3.4.2 Expander
- 3.4.3 Compressor & Limiter
- 3.4.4 Automatic Gain Control
- 3.4.5 Equalizers
- 3.4.6 Graphic Equalizer
- 3.4.7 Feedback Suppressor
- 3.4.8 Noise Gate
- 3.4.9 Ducker
- 3.4.10 Ambient Noise Compensation (ANC
- 3.4.11 Auto Mixer
- 3.4.12 Acoustic Echo Cancelation
- 3.4.13 Noise Suppression
- 3.4.14 Matrix
- 3.4.15 High and Low Pass Filter
- 3.4.16 Delay
- 3.3.17 Output
- 3.4.18 USB interface
- 3.5 Settings Menu
- 4. Control
- 5. FAQs
- Appendix A: Module ID Distribution
- Appendix B: Module Parameter Types (1)
ALF-DSP 88-U
-14-
Software Installation:
Visit the device web page address: 169.254.10.227
1. Download software from the product website and install files.
2. Double click the downloaded file and install by following the instructions on the screen.
After the software is installed, read other parts of the help file , or execute the software.
After the software is installed, use one of the following methods to open the software:
1. Double Click Desktop Icon
2. Open from Start menu
3.2 Using the Software
After enabling the software, the main menu is shown as below:
Click the button in the right corner of the main me nu to find all processors on the network
automatically. The user may connect to the designated processor based on their own needs; after the connection,
the indicator will flash; each processor supports simultaneous connection and control for up to four users.
3.3 Custom edit processing module
Click on the edit button, input or output channel processor module right-click selection, edit dialog box, can replace
the current processing module, can delete, copy and other operations, edit good click upload to the host. Note:
when the CPU display more than 100 will turn red, this time the resource can not be uploaded to the host, need to
be re-edited.