Operation Manual

24
z Fold up the hem and fold it back to from a
1/4˝ (0.4 to 0.7cm) allowance as
illustrated.
q Wrong side of the fabric
w 1/4˝ (0.4 to 0.7 cm)
[A]Fold hem under the fabric for lightweight
fabrics.
[B]On heavy weight fabrics tend to ravel, the
raw edge should be overcast first.
x Position the fabric so that the needle just
pierces the edge of the fold when the
needle swings to the extreme right.
Lower the presser foot.
c Turn the guide screw to adjust the guide
aligning with the folded edge.
Sew along the folded edge guiding the
fabric so the needle catches the folded
edge.
e Guide screw
r Guide
t Folded edge
v Open the fold flat.
y Right side of the fabric
*If the needle drops far left, the stitches will
show on the right side of the fabric.
q
q
w
w
[A] [B]
t
r
e
y
qw e
rt
Blind Hem Stitch
q Stitch pattern: 5 (3 dial model)
Stitch pattern: 5 or 6 (2 dial model)
w Presser foot: Blind hem foot
e Thread tension: 2 to 4
r Stitch length: 1 to 3
t Stitch width*: 5