Operation Manual

20
5
3
4
qw e
rt
Corded Buttonhole
q Stitch pattern: (BH)
w Presser foot: Sliding buttonhole foot
e Thread tension: 1 to 5
r Stitch length:
t Stitch width*: 5
1
4
2
4
2
3
q
z With the buttonhole foot raised, hook the
cord on the cord spur at the back of the
buttonhole foot.
q Spur
x Bring the ends toward you under the
buttonhole foot until they clear the front
end.
c Hook the filler cord into the forks on the
front of the foot to hold them tight.
v Lower the needle into the garment where
the buttonhole will start and lower the foot.
b Depress the foot control gently and sew
the buttonhole. Each side of the
buttonhole and the bartacks will be sewn
over the cord.
n Remove the fabric from the machine and
cut the sewing threads.
m Pull the left end of the filler cord to tighten it.
, Thread the end through a darning needle,
draw to the wrong side of the fabric and
cut.