Operation Manual

13
S.S.
q
As long as you keep the reverse stitch button
depressed, the machines sew in backwards.
Adjusting Stretch Stitch
Set the stitch length control at "S.S." to sew
the stretch stitch pattern sewing.
If the stretch stitch pattern is uneven, turn the
stitch length dial in the direction of "–" to
compress it, or "+" to expand it.
Stitch Width Dial (3 dial model
only)
Turn the stitch width dial to set the desired
stitch width at the setting mark.
The higher the number, the wider the stitch
width.
q Setting mark
NOTE:
Raise the needle above the fabric, when
you turn the stitch width dial.
Reverse Stitch Button
Position the darning plate with 3 pins on the
bottom.
Fit the darning plate pins into the needle
plate holes. The feed dogs will show through
the darning plate holes.
Darning Plate
q