User Manual
16 17
-
-
minimum safety distance is respected.
LIGHTING THE OVEN
1 - In the center of the oven or slightly right of center create a cross
stacked pile of ALFA Wood using smaller pieces
2 - Light the QwikWik restarters to ignite your initial cross stacked
wood pile in the oven
3 - After the wood is on re, replace the oven door on the oven
warming shelf leaving a small gap of 1-2 inches so air can enter the
oven and to help keep the re roaring.
oven and heat the oven to your desired temperature faster.
4 - Slowly add larger wood logs to create a larger re.
about 15-20 minutes depending on the size of your oven. Larger ovens
the oven.
5 - After you’ve built a nice re and hot bed of coals move them
to the left side of the oven with the help of the ember mover. The
accurate oven chamber temp.
6 - Clean the refractory oor with the brush tool.
7 - Using a laser thermometer check the temperature of the
oven oor. You want it to be about 650°-750°F.
8 - When the oven oor is the right temperature you’re ready to
begin cooking your pizzas!
free to replace the oven door with the same gap for air as mentioned in
continue next page >>
1.1 1.2 2
3.1
3.2
4 5
6 7
8.1
8.2
continue next page >>