User Manual

12 13
CONNECTION TO THE GAS CYLINDER
F1
F2
OVEN
A
E
A - Regulator connect to oven
E - 1/2” male gas tting (3/8” OD Flare x 1/2” MIP - Tapped 3/8” FIP
F1 - LPG hose connect to oven
F2 - LPG hose/regulator connect to propane gas cylinder.
CONNECTION KIT
Connect Regulator (A) to the oven.
Connect Propane Hose (F1) to the Regulator (A) using 1/2” Male Gas
Fitting (E) - 3/8” OD Flare x 1/2” MIP - Tapped 3/8” FIP.
Connect Propane Hose/Regulator to Propane Gas Cylinder
*use gas seal tape or pipe thread sealant where needed
NORTH AMERICA ONLY
1
2
3
4
5
Begin by Converting the Regulator to LPG
- 1 -
Natural gas supply (H)
- 2 -
Unscrew the cap to access the
regulator adjustment.
- 3 -
The plastic adapter should be turned
upside down depending on the type
of gas supply.
LPG
NATURAL
GAS
- 5 -
Ret the cap.
H G
A
- 4 -
CONVERTING YOUR OVEN