Technical data
~
ENGINE MAIN MECHANICAL UNiT
27. Fitloil filter by manually tightening
it and insert dipstick.
,
28.
Bi
means
of a suitable box
span-
‘ner
fit
Fpark
plugs tightening them
ac-
‘cording
t9 specified torque.
$
:
Tightening
torque
Spark plugs:
i5
+
34
N.m
~ (2.5 + 3.5
Kg.m)
829.
Fii
alternator and control belt.
‘(1)
Fecure bracket
@
and
@
to en-
gin?
fiont
caver and tighten the two
relevant screvis
0.
(2)
‘POsition
alternator on engine
sup-
ports
&d
tighten bolts
@
without
fully
locking them.
(3)
K&y
alternator and water pump
drive belt on relevant pulleys.
(4) Adjust belt tension according to
specified value and then lock bolts
Load: 8 Kg
Arrow: 15 mm
1 Bolts
2 Alternator
3 Screws
4 Bracket
5 Bracket
QI-17
30.
,Retiount
injectors on intake
manifolds, replacing relevant O-rings,
and fix
lfuel
manifold.
31. Position injection wiring on engine
and reconnect it to stated
compo-
nents:
-
supplementary air solenoid valve
-
power module on distributbr
-
engine water temperature
sensor
-
injectors.
32.
Fil1
the engine with specified en-
gine
oil
and with specified quantity.
AGIP Sint 2000 SAE
lOW/40
IP
Sintiax SAE
iOW/40
SHEEL
Super Plus
Motor
Oil
SAE
15Wl50
Oil
quantity
required for complete
lrefill
(sump,
filter
and
oil
channels):
’
4.1 litre
May 1988