Technical data

r
COMPLETE CAR
TEST No. 6 -
CHECK OF ELECTROINJECTORS CIRCUIT
Set multimeter to 200 Ohm F.S.
Di,sco’nnect injection CU connecter.
Check resistance between CU connec-
TEST No. 7
Octdber 1988
Disconnect electroinjectors removing
relevant connectors.
Measure resistance on terminal of
every single injecter, that Will result
between 14 and 18 Ohm.
NO
Replace faulty injectors.
Check on single connectors of injec.
tors WIRING SIDE, that one of two
pins is connected to terminal 87a of
S12a relay and the other to pin 3 of CU
connecter.
NO
I --
1’
nestore wiring.
00~35111 PA327900883301