Technical data

COMPLETE -CAR
TEST No. 4 -
CHECK ON MIN. 81 MAX. THROTTLE OPENING’SWITCH (CU PIN 15 AND 14)
Set multumeter to 200 Ohm FS.
-Fi
Key removed.
~ Dlsconnect injection electronic CU~ Dlsconnect injection electronic
CU
1)
j: : 1
q?
Check setting and efficiency of mini-
Insert multimeter probes between CU
connecter pin 15 and ground.
Check the existante of a reslstance
vajlue~lower than 10 Ohm.
Piess accelerator and check an infinl-
Itel resistance value.
1 .‘l
1
YES
I
I
I
Chech wiring continuity between:
NO
- black wire bn S6 swifch connection
b Restore wlring.
and ground.
Check wiring continuity between:
NO :
white wire on S6 switch connection
b Restore wiring.
and CU connecter pin 15 for inter-
ruption, short-circuit on Interference
with other tables.
Insert multimeter probes between
connecter pin 14 and ground.
Check the presence of an infinlte
resistance value.
Check setting and efflciency of maxi-
1 Fully depress the accelerator and 1
check a resistance value lower than 10
I
Ohm.
;ES
TEST No. 5
Check wiring cxontinuity between yel-
low wire on S6 switch connection and
CU connecter pin 14, for interruption,
short-circuit or interference with other
1 Gables.
,00=35/9
PA327900883301