Technical data

1 Fuel supply ihose
2 Electroinjectors supply wiring
‘4. Remove e,lectroinjectors
0
com-
:plete with b-ring
@ ‘ancl gasket @
-.
.-
1 Fuel supply, hose
2 Electroinjectors
3 Gasket
4 0-ri’ngs ~
5. Proceed to asseq7ply operating in
reverse ordb in respect to removal,
following ;these instructions:
,-
Replace all O-rings and gaskets.
-
Positioh electroinjector and rele-
vant cdnnector ‘outward.
-
Reco,nRect all components remo-
ved’at iemoval time.
October 7988
FUEL PRESSURE
GAUGE
REPLACEMENT
WARNING:
Operate carefully: fuel system
coud be pressurized.
1. Unscrew the two connecting fittings
oEue supply hose @ to regulator
’
2. Disconnect tube
0 from regula-
tor.
3. Connect tube @,
unscrew f lg$:
shown nut, and remove regulator
1 Pressure regulator
2 Depression tube for pressure regulator
3 Fuel supply hose
4 Excess fuel recovery tube
04.16
PA3279EO883301
4. Effect assembly operating in rever-
se order in respect to removal.