Technical data

‘1
Y
ENGINE MAlN~MECHANICAL~UhjIT
‘Connecting rods and big end bearings
Unit: mm (in)
8’
Inspection data
Engine
1800
VM 82A
Connecting rod small end bearing bore “a” 30.030 to 30.045 (1.1823 to 1.1829)
Connec$ing rod small end bearing outside diameter “b” 34.089 to 34.129 (1.3421 to 1.3437)
Bush housing inner dia.
“c” in small end
Big end inner dia. “d” (1)
34.000 to 34.025 (1.3386 to 1.3397)
57.563 to 57.582 (2.2663 to 2.2670)
I
Standard
I
53.975 to 64.014 (2.1250 to 2.1265)
Connecting rod big end bearing bore (1’) ‘le”
Undersize
1st
2nd,
53.725 to 53.764 (2.1152 to 2.1167)
53.475 to 53.514 (2.1053 to 2.1068)
(18) ~ TO be measured with connecting rod screws tightened to 79.4 to 84.3 N.m (8 to 8.6 kg.m; 57.84 to 62.18 ft.lb)
PA333500883300
01-43
May 1988