User`s guide

Alfa Network, Inc. Page 23
Connect to a wireless network in ad hoc mode
1. To connect this adapter to another computer, select the “Station (ad hoc)” mode and click
the “Next” button to proceed.
2. The RT-Set scans the available wireless adapters within your LAN. Those adapters are
listed with their SSID. Click the one that you are going to connect with and then click the
“Next” button. You may also click the “Refresh” button to scan the wireless adapter
again.
3. The “unsecured network” window may pop up if the adapter you select doesn’t use
security encryption settings. Click the “OK” button after your confirmation.