User guide

8
SETTINGS – PPPoE(ADSL)
1) Select PPPoE to be assigned automatically from an Internet service provider (ISP)
through a DSL modem using Point-to-Point Protocol over Ethernet (PPPoE).
2)
◆User Name — Sets the PPPoE user name for the WAN port.
◆Password — Sets a PPPoE password for the WAN port.
◆Verify Password — Prompts you to re-enter your chosen password.
◆Operation Mode — Enables and configures the keep alive time and configures the
on-demand idle time.
3)
Security Setup
Network Name (SSID) — SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.