User guide

7
EASY SETUP
The Easy Setup is designed to help you to configure the basic settings required to
get the OUTDOOR AP/CPE up and running. There are only a few basic steps you
need to set up the OUTDOOR AP/CPE to get the connection.
Click on Easy Setup to bring up the wizard
OPERATION MODE – AP ROUTER
In AP Router mode, your N5C unit is turned to a wireless router and wireless
interface will become the LAN side; if your PC is connected to the PoE port, the
management IP will change to the LAN IP (192.168.2.1). The remote management
will be automatically turned on to allow you managing the device from the PoE LAN
port.