User guide

WIRELESS SETTINGS

BASIC

◆Wireless On/Off — Enables or Disable the radio. (Default: Turn On)

◆Wireless Mode — There are 4 wireless mode, those are Access Point, WDS Access

Point, WDS Repeater and WDS Client

Note.

If WEP authentication is selected for WDS communication, you will then only have

one set of encryption for the entire channel.

◆Network Name (SSID) — The name of the wireless network service provided by the

OUTDOOR AP/CPE. Clients that want to connect to the network must set their SSID

to the same as that of OUTDOOR AP/CPE. (Range: 1-32 characters)

◆Multiple SSID — One additional VAP interface supported on the device.

◆Frequency (Channel) — The radio channel that the OUTDOOR AP/CPE uses to

communicate with wireless clients.

◆Network Mode — Defines the radio operating mode.