User guide

Name Server.

IPSec

Verify the desire settings and use scroll down for more options.

◆ IPSec Connection Type – Use drop down menu to select from Road Warrior

Tunnel, Host to Host Tunnel, Subnet to Subnet Tunnel, Host to Host Transport,

Pass trough, Drop, or Reject. Default setting is Road Warrior Tunnel

◆ IPSec Authentication – Use drop down menu to select from SHA-1, or MD5.

Default setting is SHA1.

◆ SA Connection Life Time – Specify how often each SA should be rekeyed,

measured in hour.

◆ Local IP address / Subnet / Gateway – Local end point IP address, Subnet, and

Gateway IP address.

◆ IPSec Operation Mode – Use drop down menu to select from Add, Route Start,

Manual, or Ignore. Default setting is Add.

◆ IKE Key Retry –Specify maximum retry limits for negotiate key to Internet Key

Exchange.

◆ Peer IP address / Subnet / Gateway – Remote end point IP address, Subnet, and

Gateway IP address.

L2TP